Energy Eco 11kW

Item No. 3096040015

Full inverter heat pump The full inverter heat pump is equipped with the latest technology in terms of heat pumps, compressors and fans, along with an advanced smart control system. The full inverter heat pump combines smart software with continuous optimal efficiency. The full inverter heat pump

Read full description

Description
General
Specifications

Description

Full inverter heat pump

The full inverter heat pump is equipped with the latest technology in terms of heat pumps, compressors and fans, along with an advanced smart control system. The full inverter heat pump combines smart software with continuous optimal efficiency. The full inverter heat pump automatically adjusts the heat capacity between 25% and 100%, depending on the demand from the pool water.

General

Characteristics

4 types, 7 to 16kW pool volume up to 50m³
Plastic design housing
Very high efficiency
Low noise level
User-friendly LCD display
Controller 3 key operation
Effective from -2°C

How does it work?

Energy ECO Full-Inverter® control.
The Full-Inverter® heat pump control works completely continuously between 25 and 95 Hz. The optimum speed of the compressor and fan is determined by the deviation from the required temperature. The greater the deviation, the higher the power delivered. The Energy ECO Full-Inverter® heat pump will try to keep the pool at the right temperature with the lowest possible speed of the compressor (and therefore the lowest possible electrical consumption). In this situation the efficiency of the heat pump is highest and the noise production is lowest.

Very high efficiency
The Energy ECO Full-Inverter® heat pump is equipped with a unique, linear control. Due to this linear, stepless regulation of the compressor between 25 and 95 Hz, efficiencies (COP) of up to 12 can be achieved! This means that the heat pump has a power consumption of 1 kW of electricity and a power output to the swimming pool water of max. 12 kW of heat.

Low noise level.
Because the Full-Inverter® heat pump rarely runs at 100% of its capacity, the noise level of this continuously regulated Full-Inverter® heat pump is very low.
For the night situation, the noise level can be reduced to 28 dB(A) by means of the silence mode. Same sound level as whispering.

Specifications

Width	1003 mm
Height	603 mm
Depth	403 mm
Flow Rate	4.1 m³/h
Maximum Pool Volume	40 m³
Performance Conditions	Air 27°c - Water 26°c - Humidity 80%
Consumed Power	0,24 - 2,37 kw
Operating Current	10.3 A
COP	7.0 - 4,6
Performance Conditions	Air 15°c - Water 26°c - Humidity 70%
Heating Capacity	1,6 - 8,4 kW
Consumed Power	0,31 - 1,95 kW
Operating Current	8.4 A
COP	5,1 - 4,3
Sound pressure at 1m	42 - 53 dB(A)
Sound pressure at 1m silence mode	43 dB(A)
Sound pressure at 10m	22 - 32 dB(A)
Sound pressure at 10m silence mode	22 dB(A)
Power Supply	230 - 240V / 1Ph / 50Hz
Operating Temperature	-2 / 40
Max Frequency	90 Hz
Test Conditions	Pool with slatted cover, swimming season late April to late September The swimming pool pump must run 24 hours/day in the spring and autumn Min. air temperature 15°C